Ducati singles parts plus racing brakes and fiberglass


				DUC BITS,etc.! *DUCATI SINGLES PARTS*



	DUC BITS,etc.! \| DUCATI SINGLES PARTS \| VINTAGE RACING GLASS \| GIMME A BRAKE! \| MISCELANEOUS

ENGINE PARTS:

IMOLA 12MM DESMO CAM

VARIOUS CAMS

DAYTONA CAM: Four wins and a second at Daytona 250cc classic GP. Thirty-five other AHRMA wins that we know of. No need to cut the head.............................................$330

IMOLA HI-LIFT CAM. 12mm lift! Designed for the 450. Makes a 12,000 rpm 250! Must cut the cam gallery ......................................$330

IMOLA DESMO CAM.........$383

GORILLA CAM. 12.7mm lift!......$330

RECHROMED ROCKER...................$250

(Sorry about that. It's less to swap in your old ones. Stellite hard coating can cause your rockers to crystalize and break.)

480/500cc KIT

DIANA RINGS, NOS, all sizes....................$42

VALVE SPRINGS, OE hairpin type..............$60

VALVE SPRINGS, short coil type to raise the guide.

VALVE SEALS FOR SPRING HEAD

BEVEL GEAR PAIR, upper, lower.

ROD, OE type, NC, WC.

COSWORTH RACING ROD

ITALIAN RACING ROD, w/34mm pin.

ROD BEARINGS, w/alu cage (street only)

ROD BEARINGS, TO w/machined alu cage.

NEEDLE SET, w/round ends.

STRAIGHT-CUT PRIMARY GEARS..........$585

ERGAL ALLOY CLUTCH HUB...................$450

DRY CLUTCH KIT, includes alu cover, straight-cut primary gears, alu basket, bearings, etc. Bolts on; no need to crack the cases. Sand-blasted finish. Looks very F III.

CLOSE RATIO GEAR CLUSTER

WITH BOTH SHAFTS............$1800